Authorized Distributor
Shopping Cart
0 items
 

Hitec D-645MW 32-Bit- High Torque- Metal Gear Servo

Hitec D-645MW 32-Bit- High Torque- Metal Gear Servo
Click to enlarge
Price: Rs.3,400.00
Availability: In Stock
Model: D645MW
Average Rating: Not Rated

All Hitec D-Series servos have been designed using the brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

 

Features

Programmable PWM Digital Amplifier

32-Bit MCU with 12-Bit ADC Circuitry

4096 Resolution

1M Cycle Long Life Potentiometer

Wide Operating Voltage (4.8 ~ 8.4 Volts DC)

Dual Ball Bearing Supported Output Shaft

25-Tooth Output Spline

 

Programmable Functions

End Point Adjustments

Direction

Fail Safe

Dead Band

Speed (Slower)

Soft Start Rate

Overload Protection

Data Save / Load

Program Reset

 

D645MW Servo Specifications

Performance Specifications

Operating Voltage Range (Volts DC)

4.8V ~ 6.0V ~ 7.4V

Speed (Second @ 60°)

0.28 ~ 0.20 ~ 0.17

Maximum Torque Range oz. / in.

115 ~ 158 ~ 180

Maximum Torque Range kg. / cm.

8.3 ~ 11.3 ~ 12.9

Current Draw at Idle

30 mA

No Load Operating Current Draw

500 mA

Stall Current Draw

2,650 mA

Dead Band Width

2 µs

Physical Specifications

Dimensions (Inches)

1.59 x 0.77 x 1.48

Dimensions (Metric)

40.6 x 19.8 x 37.8

Weight (Ounces)

2.11

Weight (Gram)

57.0

Circuit Type

32bit Programable Digital

Motor Type

3 Pole Metal Brush Ferrite

Gear Material

Metal

Bearing Type

Dual Ball Bearing

Output Shaft (type / Ømm)

H25T

Case Material

Plastic

Dust / Water Resistance

N / A

Connector Gauge (AWG) / Strand Count

22 / 60

 

 

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.
Follow @SUMEETeSHOP
Hitec D-645MW 32-Bit- High Torque- Metal Gear Servo

All Hitec D-Series servos have been designed using the brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

 

Features

Programmable PWM Digital Amplifier

32-Bit MCU with 12-Bit ADC Circuitry

4096 Resolution

1M Cycle Long Life Potentiometer

Wide Operating Voltage (4.8 ~ 8.4 Volts DC)

Dual Ball Bearing Supported Output Shaft

25-Tooth Output Spline

 

Programmable Functions

End Point Adjustments

Direction

Fail Safe

Dead Band

Speed (Slower)

Soft Start Rate

Overload Protection

Data Save / Load

Program Reset

 

D645MW Servo Specifications

Performance Specifications

Operating Voltage Range (Volts DC)

4.8V ~ 6.0V ~ 7.4V

Speed (Second @ 60°)

0.28 ~ 0.20 ~ 0.17

Maximum Torque Range oz. / in.

115 ~ 158 ~ 180

Maximum Torque Range kg. / cm.

8.3 ~ 11.3 ~ 12.9

Current Draw at Idle

30 mA

No Load Operating Current Draw

500 mA

Stall Current Draw

2,650 mA

Dead Band Width

2 µs

Physical Specifications

Dimensions (Inches)

1.59 x 0.77 x 1.48

Dimensions (Metric)

40.6 x 19.8 x 37.8

Weight (Ounces)

2.11

Weight (Gram)

57.0

Circuit Type

32bit Programable Digital

Motor Type

3 Pole Metal Brush Ferrite

Gear Material

Metal

Bearing Type

Dual Ball Bearing

Output Shaft (type / Ømm)

H25T

Case Material

Plastic

Dust / Water Resistance

N / A

Connector Gauge (AWG) / Strand Count

22 / 60

 

 

Rs.3,400.00